Fongly group Catalog(2022-English)

Good decorative performance: the coating surface is smooth and smooth, and the color is uniform and bright; Weather resistance: Good corrosion resistance, color and luster retention, long service life, lasting as new; Wide machinability: the coating has strong adhesion and good toughness, which improves the ductility of metal materials; Good consistency: uniform coating thickness to ensure the continuity and consistency of product color; There are many kinds of coatings: polyester, polyurethane, uorocarbon, lm coating and other coatings can be selected to meet special needs. Product characteristics Performance table of uorocarbon spraying coating Mainly used for building exterior wall decoration. Interior wall, ceiling, foyer, facade, post, grid structure, outdoor oating shed, etc. Tunnel siding, indoor modeling ceiling. Advertising signs and others. Application eld Average coating thickness 1 2 Chromatic aberration Glossiness Pencil hardness Adhesion, grade Impact resistance Wear resistance Hydrochloric acid resistance Nitric acid resistance Resistant mortar Detergent resistance Moisture resistance Salt spray resistance Fade Powder Gloss retention Film thickness loss Fading Powder grade, grade Loss of light grade, grade Weather resistance Arti cial aging resistance Serial number Project Technical index Second coating ≥ 30 μ m, third coating ≥ 40 μ m Speci ed value ± 5 ≥ HB Grade 0 of grid method 50Kg.cm, no paint stripping ≥ 5L/um 15min drip, no bubbles, no change in appearance Color change △ E ≤ 6NBS No change at all No bubbles, no paint lm shedding 4000h, above Grade II 4000h, above Grade II Ten years later, △ E ≤ 5 NBS Ten years later, GB/T1766, Grade 1 After 10 years, the retention rate is 50% ≤ 10% after 10 years △ E ≤ 5NBS after 200h 0 after 200h No less than Grade 2 after 200h Visual inspection without obvious chromatic aberration or monochromatic coating △ E ≤ 2NBS measured by computer chromatic aberration meter 3 4 5 6 7 8 9 10 11 12 13 14 15 13